15 Amps or 20?

Most branch circuits for lighting will be 15 amps. Twenty-amp circuits normally are reserved for dedicated purposes. It’s perfectly acceptable to use a 20-amp circuit for lighting, but use it judiciously because it can handle, for example, four more 100-watt fixtures than a 15-amp circuit. Great, you say, that means less wiring to do—at least until the lights go out. Then it might not be so great. You’ll have that much less light to see by if an entire section of your house goes dark. Twenty-amp lighting circuits work well when you have a large cluster of lights such as in a kitchen/ hallway combination where you might have as many as 10 150-watt recessed fixtures. You also should consider a 20-amp circuit for your home office computer and peripherals. Check the rating of your copier, which could need its own circuit.